Brak Pedal Force and Distance Testing

Customer needs to measure pedal force in relationship to distance the pedal is pushing during automobile testing.

Summary

Customer Need / Challenge
Customer needs to measure pedal force in relationship to distance the pedal is pushing during automobile testing.
Interface Solution
As pedal is pushed, force is measured by BPL Pedal Load Cell and distance is measured by LVDT. Results are shown graphically and on a display while the data is being logged to a CSV file by model SI-USB4.
Results
Customer objective has been achieved. When pedal test was executed, the force measurement and distance measurement were simultaneously displayed, graphed and logged for examination in their lab.

The BPL Brake Pedal Load Cell securely mounted on the top of the brake pedal, and the customer’s LDVT is installed on the back of the braking assembly.
The jet engine is ignited and produces a full thrust.
Both the BPL and LDVT is connected to the SI-USB4 4-Channel USB Interface Module. A brake test is performed and the force.
A brake test is performed and the force measurements are displayed, graphed, and logged onto the customer’s PC when connected to the USB connection of the SI-USB4.

Request Calibration

Select up to 5 Repairs and/or Calibrations per form.
Quantity*
Select the number of products that require service
PART 1
1.Service Requested*
Please share detail of the repair or calibration in comments below
1. Select Product and Calibration*
1. Part details*
Part # Serial # Manufacturer
1. Detailed Description or Comments*
PART 2
2. Service Requested*
Please share detail of the repair or calibration in comments below
2. Select Product and Calibration*
2. Part details*
Part # Serial # Manufacturer
2. Detailed Description or Comments
PART 3
3. Service Requested*
Please share detail of the repair or calibration in comments below
3. Select Product and Calibration*
3. Part details*
Part # Serial # Manufacturer
3. Detailed Description or Comments
PART 4
4. Service Requested*
Please share detail of the repair or calibration in comments below
4. Select Product and Calibration*
4. Part details*
Part # Serial # Manufacturer
4. Detailed Description or Comments
PART 5
5. Service Requested*
Please share detail of the repair or calibration in comments below
5. Select Product and Calibration*
5. Part details*
Part # Serial # Manufacturer
5. Detailed Description or Comments
Name*
First Last
Email*
Shipping Address*
Street Address City ZIP Code
Country*
State*
Canadian Province or Territory
International State or Region or Province*
Phone*
International Phone Number*
Company*
CAPTCHA
Phone
This field is for validation purposes and should be left unchanged.

Request Quote

Name*
First Last
Email*
Country*
State*
Canadian State or Territory*
International State or Territory or Region*
Phone*
International Phone Number*
Zip Code/Postal Code*
City*
Street Address*
Company*
Primary Product of Interest*
If more than one product quote is needed, please input all information in the model numbers and comments below.
Industry*
Model Number(s)*
Comments or Notes*
If requesting a quote for multiple items, list all products and models here.
CAPTCHA
Name
This field is for validation purposes and should be left unchanged.